Engine Removal – Part 1The plugs were already out so I poured Marvel’s Mystery Oil into the holes and crossed my fingers.It is a very compact engine to say the least.First thing to come off is the engine compartment lid.The rear bumpers come off pretty easy.Finally you can take off the whole back panel of the car.Which leaves it very open and the engine accessible.The oil filter. Yes, it is a centrifugal force oil filter. Thanks to Jeff Guerdat from the Yahoo 850 group.The uncovered crank pulley, I hope I have a big enough socket! 1.25″ or 32mmValve cover removed.Tearing down the head.With the head and carb off, you can see some of the crap still on the number 3 cylinder.Another view of the block.the Weber carb, the head and valve cover.Cylinders filled with oil and covered up until Monday.I made this wooden marshmallow to put into the stuck #3 and smack with a rubber mallet. No luck though, the piston will not budge.Engine diagram from the service manual.Engine diagram from the service manual.