by Scott Slusser | Jun 22, 2012 | Photos
Wheeling the block outside for operation fireball. Stuffed the Kroil soaked towel into the cylinder And now we are cooking with fire. It actually worked! The heat and some muscle did the trick. All the pistons are out and the engine is ready for the machine shop....
by Scott Slusser | Jun 22, 2012 | Photos
Stamped numbers on the bottom of the connecting rods so they can all stay together. After removing the oil pump. Pump is run by the camshaft via gears. (Block is upside down) Looking up into the block. You can see the oiling holes in the driveshaft after the main...
by Scott Slusser | Jun 22, 2012 | Photos
Engine oil drained and the engine upside down to tear into the bottom half. Oil pan removal. Some of these bolts did not have enough room for a ratcheting wrench. Take off the engine mount (Block is upside down) Oil pan off and first look into the block. The oil pump...
by Scott Slusser | Jun 22, 2012 | Photos
There is a lower shroud that needs to come off before the engine can be separated from the tranny And it just slides away … Removing the clutch. Front of the clutch Clutch friction plate Inside the clutch These bolts have to come off to free up the flywheel....
by Scott Slusser | Jun 22, 2012 | Photos
Ignition coil showing the wires for the sake of putting it all back together. Ignition coil showing the wires for the sake of putting it all back together. The top of the coil. A very nice wiring block for the coil. Removing the exhaust from the block. Getting pretty...
